Product detail
High Alumina Mortar
Product Parameters
| Item | Common Type | Phosphate Bonded Type | |||||||||
| LN-55A | LN-65A | LN-75A | LN-85A | LN-55B | LN-65B | LN-75B | LN-85B | ||||
| Al2O33 (%) ≥ | 55 | 65 | 75 | 85 | 55 | 65 | 75 | 85 | |||
| Refractoriness(℃) ≥ | 1770 | 1790 | 1790 | 1790 | 1770 | 1790 | 1790 | 1790 | |||
| Cold Flexural Strength (Mpa) ≥ | 110℃ After Drying | 1.0 | 1.0 | 1.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | ||
| 1400℃*3h After Burning | 4.0 | 4.0 | 4.0 | — | 6.0 | 6.0 | 6.0 | — | |||
| 1500℃*3h After Burning | — | 6.0 | — | 6.0 | |||||||
| Refractoriness Under Load 2%(℃) ≥ | — | 1300 | 1400 | 1400 | 1600 | ||||||
| Permanent Linear Change (%) | 1400℃*3h After Burning | 1-5 | 1-5 | 1-5 | — | 1-5 | 1-5 | 1-5 | — | ||
| 1500℃*3h After Burning | — | 1-5 | — | 1-5 | |||||||
| Bonding Time (Min) | 1-3 | ||||||||||
| Particle Size (%) | -0.1mm | 100 | |||||||||
| +0.5mm | 2 | — | |||||||||
| -0.074mm | 50 | 40 | 50 | 40 | |||||||
Main Composition:Al2O3+SiO2
Application:Cement and blast furnace, or other industrial kilns.
Capacity:3000 MT per month
Main Raw Material:Bauxite
Refractoriness:≥1770℃
Product Introduction
High alumina mortar is mainly made of high grade bauxite and other additives. The Al2O3 content of it is from 55% to 75%.
Features
1.Good plasticity and convenient construction.
2.High bonding strength.
3.Strong corrosion resistance.
4.High refractoriness.
5.Good slag resistance.
6.Good heat-stripping property.
Application
It is mainly used for laying, bonding and jointing of high alumina bricks in the construction of furnaces or equipment.
Send inquiry
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!