Product Parameters
| 项目 Item |
ZrO2 (%) | Al2O3（%） | Fe2O3 (%) | 容量 Capacity |
最大颗粒度 Maximum partide size |
水份（%） Moisture |
冷压强度 Cold Crushing Strength |
烧成收缩 firing shrinkage |
使用温度 Using temperature |
用途 Application |
| ZSR-65 锆英石捣打料 Zircon ramming mass |
64+1 -2 ≥1560℃×2h |
/ | 0.5 | 3.45 | 4 | 3-5 | 45 | -1 | 400-1600 | 用于窑炉池底安全层、窑炉上部结构冷修和热修 For the safety layer at the bottom of the kiln pool, cold repair and hot repair of the upper structure of the kiln |
| ZSR-61 锆英石捣打料 Zircon ramming mass |
64+1 -2 ≥1500℃×2h |
4-7 | 0.5 | 3.40 | 4 | 3-5 | 45 | -1 | 400-1600 | 用于捣打窑炉池底安全层、窑炉次要部位修补 Used for ramming the bottom safety layer of the kiln and repairing the secondary parts of the kiln |
| ZSC-65 锆英石浇铸料 Zircon casting materials |
64+1 -2 ≥1560℃×2h |
/ | 0.5 | 3.50 | 4 | 5-7 | 50 | -1 | 100-1600 | 用于池底、池壁保温层、窑炉上部结构的冷修和热修 For cold and hot repair of pool bottom, pool wall insulation and furnace superstructure |
| ZSC-65 锆英石密封料 Zircon sealing materials |
61±2 | / | 0.5 | 3.45 | 4 | 3-5 | 45 | -1 | 400-1600 | 用于窑炉池底安全层、窑炉上部结构冷修和热修 For the safety layer at the bottom of the kiln pool, cold repair and hot repair of the upper structure of the kiln |
| AZSR-30 电熔AZS捣打料 Fused AZS ramming mass |
28±1 | 47 | 0.5 | 2.90 | 5 | 3-5 | 50 | -1 | 400-1600 | 用于捣打窑炉池底安全层、窑炉次要部位修补 Used for ramming the bottom safety layer of the kiln and repairing the secondary parts of the kiln |
| AZSC-20 浇铸料 Casting materials |
21±2 | 59 | 0.5 | 3.15 | 4 | 硅溶胶 5-7 Silica solution ludox |
50 | 0 | 100-1600 | 用于加料口、胸墙、池壁等部位热补 It is used for hot repair of feeding port, breast wall, pool wall, etc. |
| AZSC-30 电熔AZS浇铸料 Fused AZS casting materials |
29±2 | 47 | 0.5 | 3.00 | 5 | 6-8 | 75 | -1.2 | 100-1500 | 用于池底、池壁保温层、窑炉外部结构的冷修和热修 Cold and hot repairs for pool bottoms, pool wall insulation, and kiln exterior structures |
| AZSR-40 AZS捣打料 AZS ramming mass |
40+1 -2 |
38±2 | 0.5 | 2.90 | 5 | 3-5 | 50 | 0.5 | 100-1500 | 用于捣打窑炉池底安全层、窑炉次要部位修补 Used for ramming the bottom safety layer of the kiln and repairing the secondary parts of the kiln |
| AZSR-40 AZS-40密封料 AZS-40 sealing materials |
40+1 -2 |
38±2 | 0.5 | 2.90 | 1 | 3-5 | 50 | -1 | 100-1500 | 用于捣打窑炉池底安全层、窑炉次要部位修补 Used for ramming the bottom safety layer of the kiln and repairing the secondary parts of the kiln |
Product detail
Zirconia Mullite Brick
Product Advantages
Product Applications
Packaging
Factory Tour
Send inquiry
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!